a. On a Mac computer, click Allow in the "Allow Device Manager to connect to devices on the local network” prompt
Connect the amp to a computer with a USB cable
Press and hold the Firmware Update button on the back of the amp (near the USB-C port) while turning on the power switch
a. You should see an Update button in Fender Device Manager if the amp is in firmware update mode.
b. The red LED next to the firmware update button should be blinking as well when you are in firmware update mode
Click the Update button in Fender Device Manager
Select “Yes” in the next prompt to start the update
a. The update will take several minutes. Wait for Fender Device Manager to tell you the update is complete before disconnecting the USB cable or turning off the amp
When you see the “Firmware has updated successfully” message,
a. Turn the amp off
b. Wait for the red LED next to the firmware update button on the back of the amp to stop blinking
Comments
0 comments
Article is closed for comments.