Version Information 8/27/2025

Tone Master Pro Firmware – v1.6.48 download link
Pro Control App and Windows ASIO Driver-
Mac – v1.6.1.8311 download link
PC – v1.6.1.8311 download link

Fender Universal ASIO Driver download link (Windows) - v5.72.0 (updated 3/26/2025)

Pro Control App system requirements:

macOS Monterey 12.7 or later
Windows 10 (x64) 22H2 or later
Windows 11
iOS version 13.1 or later
Android 8 (only arm64-v8a) or later

NOTE: Pro Control App is not required for updating Tone Master Pro firmware. Both the Pro Control App and the Tone Master Pro firmware must be on same release version in order to communicate with each other. It is recommended to turn off any automatic app updates on your device(s) running Pro Control so that an app update does not occur until prompted by the user.
Release Notes:
Tone Master Pro Firmware Update

Fixes
- Fixed issue where some IRs for the 4x12 British Alnico 100 cab were not loading correctly
- Fixed issue with Scenes where Base Preset Amp Controls were tracking Scene settings when changing presets
- Fixed issue with Tuner where both outputs were not muting when using Instrument Split signal path type
- Fixed issue with block edit workflow where Saving with the PAGE footswitch which would break PAGE footswitch functionality
- Improved attack retrigger behavior for Slow Attack effect
- Fixed issue related to Edited preset name not immediately updating on footswitch scribble strip when saved
- Fixed issue with Scenes where a Scene could overwrite Base Preset settings when switching presets (Discard Changes Mode)
- Fixed issue related to Shimmer Reverb Damping control
- Fixed some inconsistencies with creating, deleting, editing, and changing scenes when Scene Change Behavior is set to Discard Mode
- Fixed issue related to Preset and Scene MIDI where PC messages weren’t always being sent before CC messages

Known Issues
- Rocket Man - subtle noise in signal chain when the effect is added
- Nashville Overdrive - low-level audio artifacts when guitar volume down
- SWR Redhead - minor thump sometimes heard when using Turbo Switch
- Difficult to adjust Pitch R parameter on Micro Pitch pedal
- Rock-Bottom 400 - slight click heard if Mid-Contour and Hi-boost are engaged/disengaged while playing

Firmware Update Procedure
See Firmware Update Instruction Guide for additional information.

Download the latest firmware at the top of this article.
Connect Tone Master Pro to computer via included USB-C cable.
Hold down firmware update button for 10 seconds while powering on.
Tone Master Pro will display “USB Firmware Update Mode” screen.
Drag and drop firmware update file (“.img” file) onto “FENDER_AMP” mounted drive on your computer.
Tone Master Pro will display “Applying Updates” screen. Do not power off until update is complete.
Tone Master Pro will display “Update Complete” screen once the firmware update is complete. Restart Tone Master Pro and enjoy!

The note below is only for users who have firmware version lower than v1.1.100 on their TMP. If you have v1.1.100 or higher installed, please disregard the following.
NOTE: After you install the firmware update, we strongly recommend you perform a Factory Reset if this is the first time you are updating. The Factory Reset is in the Global Settings (Gear) menu under User Preferences. Please note Factory Reset WILL erase all presets and settings and will load additional Factory Presets into the MY PRESETS folder.
--------------------------------------------------------------------------------------------------------

Version Information 6/4/2025

Tone Master Pro Firmware – v1.6.38 download link
Pro Control App and Windows ASIO Driver-
Mac – v1.6.0.7950 download link
PC – v1.6.0.7935 download link

Fender Universal ASIO Driver download link (Windows) - v5.72.0 (updated 3/26/2025)

Pro Control App system requirements:

macOS Monterey 12.7 or later
Windows 10 (x64) 22H2 or later
Windows 11
iOS version 13.1 or later
Android 8 (only arm64-v8a) or later

Fixes:
- Fixed issue related to re-loading presets that include dual mic or dual cabinet
Known Issues:
- Audio from the lower path in Instrument Split signal path does not mute when Tuner is active and Mute is selected. Workaround is to enable both Instrument and Mic/Line within Tuner.
- Subtle noise in signal chain when the Rocket Man is added
- Nashville Overdrive - digital artifact when guitar volume down
- SWR Redhead - minor thump sometimes heard when using Turbo Switch
- Rock-Bottom 400 - slight crackle heard if Mid-Contour is engaged/disengaged while playing

Firmware Update Procedure
See Firmware Update Instruction Guide for additional information.

Download the latest firmware at the top of this article.
Connect Tone Master Pro to computer via included USB-C cable.
Hold down firmware update button for 10 seconds while powering on.
Tone Master Pro will display “USB Firmware Update Mode” screen.
Drag and drop firmware update file (“.img” file) onto “FENDER_AMP” mounted drive on your computer.
Tone Master Pro will display “Applying Updates” screen. Do not power off until update is complete.
Tone Master Pro will display “Update Complete” screen once the firmware update is complete. Restart Tone Master Pro and enjoy!

Version Information 5/14/2025

Tone Master Pro Firmware – v1.6.34 download link
Pro Control App and Windows ASIO Driver-
Mac – v1.6.0.7950 download link
PC – v1.6.0.7935 download link

Fender Universal ASIO Driver download link (Windows) - v5.72.0 (updated 3/26/2025)

Pro Control App system requirements:

macOS Monterey 12.7 or later
Windows 10 (x64) 22H2 or later
Windows 11
iOS version 13.1 or later
Android 8 (only arm64-v8a) or later

New Models
- Guitar Amps
  - '57 Deluxe
  - Blues Junior LTD
  - Brit Breaker
  - British 45
- Bass Amps
  - SWR Redhead
  - Rock-Bottom 400
- Cabinets
  - 1x12 '57 Deluxe
  - 1x12 Deluxe Blue
  - 2x12 British Greenback
  - 4x12 British Alnico 100
  - 2x10 SWR Redhead
  - 4x10 Rock-Bottom
  - 6x10 Bassman Pro Neo
- Effects
  - Comic Sans Drive
  - Analog Chorus
  - Stereo Analog Chorus
  - Analog Bass Chorus
  - Analog Vibrato
  - Stereo Doubler
  - Aurora Delay
  - Stereo Aurora Delay
  - Polyhedron Pitch Delay
  - Arctic Sustainer
  - Antarctic Sustainer
  - Small Room Reverb
  - Small Plate Reverb
  - Ascension Convolution Hall Reverb
  - Imperium Convolution Hall Reverb
  - Kinetic Convolution Plate Reverb
  - Atmosphere Convolution Room Reverb
  - Slow Attack
  - Micro Shifter
  - Polygon Octave Shifter
  - PolyVoice Pitch Shifter
  - Granular Arpeggiator

NOTE: Presets are limited to 1 Convolution Reverb model (this includes amps with built-in reverb)

Product Enhancements
- Added new global parameter: Scene Change Behavior
  - Allows user to determine whether changes to a scene are maintained or discarded when selecting new scenes.
    - MAINTAIN CHANGES (default): This option will reload the scene in its last modified state. This is useful when you want to recall unsaved edits for all scenes within a preset. This allows you to quickly edit multiple scenes in a preset and save once to save all edits across all scenes.
    - DISCARD CHANGES: This option will reload the scene exactly as it was last saved in the preset. This is useful in live performance where you may turn effects on/off or make other edits within a scene, and upon returning to the scene you want all unsaved edits to be discarded. When creating or editing Scenes with Discard Changes selected, you’ll need to Save the preset before switching Scenes or your changes will be lost.
- Added new global parameter: Wrap-Around Signal Path
  - Allows user to determine if the signal path will wrap around onscreen rather than scroll offscreen to the right.
    - Currently not implemented for Instrument Parallel 2 Signal Path Type
- Added Dual Mic option to combos and half stacks
  - Allows user to add a second microphone to any combo, half stack or bass amp without having to use a parallel path. User has full control of microphone blend and panning.
- Added Dual Cab option to standalone cabinets
  - Allows user to turn any cabinet into a dual cab with separate selection for cab, microphone, position, filtering, without having to use a parallel path. User has full control of microphone blend and panning.
- Save workflow update:
  - Added SAVE button to TMP on-screen keyboard.
- Added Bass Amp category to Add/Replace menu.
  - All bass amps will appear in this list as well as in Amp Heads category.
- Added user-selectable reference frequency to Tuner
  - Reference frequency is adjustable from 430Hz to 450Hz
- Added new user footswitch layout options for Songs
  - 6 presets
  - 3 presets over 3 effects
  - 3 effects over 3 presets
  - With options for selecting which preset auto-loads upon song selection
- Removed restriction on the number of External Cab blocks that can be added to a preset
- Removed restriction on Scenes to allow block replacement in any Scene rather than only in Base preset
- Delay ranges extended (1ms to 2000ms) for:
  - Digital Delay
  - Echo Filter and Stereo Echo Filter
  - Ping pong
- Delay ranges extended (30ms to 2000ms) for:
  - Dynamic Delay
  - Studio Delay
Fixes:
- Fixed issue related to the bass control response for repeats of Space Delay and Stereo Space Delay
- Fixed issues related to Scene and Preset settings (MIDI, Amp Control and Spillover) being overwritten by other Scenes or Base Preset
- Virtual footswitches now send Scene MIDI commands on Pro Control mobile/desktop
Known Issues:
- Audio from the lower path in Instrument Split signal path does not mute when Tuner is active and Mute is selected. Workaround is to enable both Instrument and Mic/Line within Tuner.
- Subtle noise in signal chain when the Rocket Man is added
- Nashville Overdrive - digital artifact when guitar volume down
- SWR Redhead - minor thump sometimes heard when using Turbo Switch
- Rock-Bottom 400 - slight crackle heard if Mid-Contour is engaged/disengaged while playing

Firmware Update Procedure
See Firmware Update Instruction Guide for additional information.

Download the latest firmware at the top of this article.
Connect Tone Master Pro to computer via included USB-C cable.
Hold down firmware update button for 10 seconds while powering on.
Tone Master Pro will display “USB Firmware Update Mode” screen.
Drag and drop firmware update file (“.img” file) onto “FENDER_AMP” mounted drive on your computer.
Tone Master Pro will display “Applying Updates” screen. Do not power off until update is complete.
Tone Master Pro will display “Update Complete” screen once the firmware update is complete. Restart Tone Master Pro and enjoy!

The note below is only for users who have firmware version lower than v1.1.100 on their TMP. If you have v1.1.100 or higher installed, please disregard the following.
NOTE: After you install the firmware update, we strongly recommend you perform a Factory Reset if this is the first time you are updating. The Factory Reset is in the Global Settings (Gear) menu under User Preferences. Please note Factory Reset WILL erase all presets and settings and will load additional Factory Presets into the MY PRESETS folder.

--------------------------------------------------------------------------------------------------------

Version Information 3/26/2025
Tone Master Pro Firmware – v1.5.21 download link
Pro Control App and Windows ASIO Driver-
Mac – v1.5.3.7680 download link
PC – v1.5.3.7658 download link

Fender Universal ASIO Driver download link (Windows) - v5.72.0 (updated 3/26/2025)

Pro Control App system requirements:

macOS Monterey 12.7 or later
Windows 10 (x64) 22H2 or later
Windows 11
iOS version 13.1 or later
Android 8 (only arm64-v8a) or later

Release Notes

Tone Master Pro Firmware update
Fixes:

Dramatically improved the switching time of the touchscreen and scribble strip graphics when selecting presets and scenes
Fixed an issue related to audio ramping when changing Scenes or Presets
Fixed issues related to preset/scene settings (Spillover, MIDI, Amp Controls) overwriting each other
Fixed an issue in which a large preset with multiple EXP Assignments could create expression pedal lag
Fixed issue under certain conditions when changing the Active / Inactive values of a parameter change footswitch assignment could cause system reboot
Owner’s Manual: Corrected several errors in MIDI CC implementation chart

Firmware Update Procedure
See Firmware Update Instruction Guide for additional information.

Download the latest firmware at the top of this article.
Connect Tone Master Pro to computer via included USB-C cable.
Hold down firmware update button for 10 seconds while powering on.
Tone Master Pro will display “USB Firmware Update Mode” screen.
Drag and drop firmware update file (“.img” file) onto “FENDER_AMP” mounted drive on your computer.
Tone Master Pro will display “Applying Updates” screen. Do not power off until update is complete.
Tone Master Pro will display “Update Complete” screen once the firmware update is complete. Restart Tone Master Pro and enjoy!

The note below is only for users who have firmware version lower than v1.1.100 on their TMP. If you have v1.1.100 or higher installed, please disregard the following.
NOTE: After you install the firmware update, we strongly recommend you perform a Factory Reset if this is the first time you are updating. The Factory Reset is in the Global Settings (Gear) menu under User Preferences. Please note Factory Reset WILL erase all presets and settings and will load additional Factory Presets into the MY PRESETS folder.
---------------------------------------------------------------------------------------------------------
Version Information 1/15/2025
Tone Master Pro Firmware – v1.5.5 download link
Pro Control App and Windows ASIO Driver-
Mac – v1.5.1.7449 download link
PC – v1.5.1.7433 download link

Fender Universal ASIO Driver download link (Windows) - v5.68.0 (updated 9/4/2024)
ASIO Driver Knowledge Base Article

Pro Control App system requirements:

macOS Monterey 12.7 or later
Windows 10 (x64) 22H2 or later
Windows 11
iOS version 13.1 or later
Android 8 (only arm64-v8a) or later

Release Notes
Tone Master Pro Firmware update
Product Enhancements:

Loading a Song always loads the first Preset in the Song
Optimizations for visual load time of Presets
Further optimizations to Pro Control app performance
Adding block to a long signal chain no longer returns screen to beginning of signal path

Fixes:

Fixed issue related to some users not able to add Favorite presets
Scene Edit now working correctly with Tap Div on delay/modulation effects
Cloud downloads now working as expected for large presets with multiple Scenes
Stability fix for the Tap Tempo gradient slider on Pro Control desktop

Known Issues:

Audio from the lower path in Instrument Split signal path does not mute when Tuner is active and Mute is selected. Workaround is to enable both Instrument and Mic/Line within Tuner.

Firmware Update Procedure
See Firmware Update Instruction Guide for additional information.

Download the latest firmware at the top of this article.
Connect Tone Master Pro to computer via included USB-C cable.
Hold down firmware update button for 10 seconds while powering on.
Tone Master Pro will display “USB Firmware Update Mode” screen.
Drag and drop firmware update file (“.img” file) onto “FENDER_AMP” mounted drive on your computer.
Tone Master Pro will display “Applying Updates” screen. Do not power off until update is complete.
Tone Master Pro will display “Update Complete” screen once the firmware update is complete. Restart Tone Master Pro and enjoy!

The note below is only for users who have firmware version lower than v1.1.100 on their TMP. If you have v1.1.100 or higher installed, please disregard the following.
NOTE: After you install the firmware update, we strongly recommend you perform a Factory Reset if this is the first time you are updating. The Factory Reset is in the Global Settings (Gear) menu under User Preferences. Please note Factory Reset WILL erase all presets and settings and will load additional Factory Presets into the MY PRESETS folder.
----------------------------------------------------------------------------------------------------------

Fender Tone Master Pro Firmware and Pro Control App Updates

Version Information 11/20/2024
Tone Master Pro Firmware – v1.4.71 download link
Pro Control App and Windows ASIO Driver-
Mac – v1.4.0.7382 download link (updated 11-20-2024)
PC – v1.4.0.7370 download link (updated 11-20-2024)

Fender Universal ASIO Driver download link (Windows) - v5.68.0 (updated 9/4/2024)
ASIO Driver Knowledge Base Article

Pro Control App system requirements:

macOS Monterey 12.7 or later
Windows 10 (x64) 22H2 or later
Windows 11
iOS version 13.1 or later
Android 8 (only arm64-v8a) or later

Release Notes
Tone Master Pro Firmware update
Desktop Pro Control App update
Mobile App update

New Effects:

Greenbox 10
Mythic Drive II
Bass Overdrive
Stereo Harmonic Tremolo
Glooper (Glitch Looper)
EQ-7B
EQ-7W
EQ-10 Stereo
Virtual Capo (Poly Pitch Shifter)

New Amps:

‘59 Bassman Custom
Super Bassman Vintage
Super Bassman OD
Rampage Blueline
‘66 Flip-Top

New Cabinet IRs:

4x10 ‘59 Bassman Greenback
4x10 Bassman Pro Neo
8x10 Bassman Pro Neo
8x10 Rampage Bass
1x15 Bassman Pro Neo
1x15 Rampage Bass

Product Enhancements:

Added Scene Footswitch Assignment type
Presets can now be exported and imported to/from Pro Control desktop app to Mac/PC for local backup. From Preset (...) menu select Export. They can then be dragged back into Pro Control from your computer (so sharing individual presets is now possible).
Added MIDI PC (Program Change) Footswitch Assignment type
MIDI CC control over Tuner added
MIDI CC control over Effects Footswitches added
Added support for multi-selection of presets within Pro Control desktop app for bulk move, clear and export within My Presets and Favorites
Added support for multi-selection of IRs within Pro Control desktop app for bulk move and delete
Added support for multi-selection of Songs when adding to a Setlist within Pro Control desktop app
Added search results count indicator to Pro Control app
Replacing a model in a preset can now be cancelled, returning to previous model and retaining all footswitch and EXP assignments
Global footswitch layouts (6 presets, 3 Effects over 3 Presets) added to Songs View
Added live audition of active/inactive settings for Parameter Change footswitch assignments
Added several new Tap Divisions to Delay and Modulation effects
Added Song BPM option to Song Footswitch Assignment screen
Added ability to overwrite existing Block Preset within Save Block Preset workflow
Added ability to reorder Block Presets from within Add/Replace menus
Mixer: USB 3 and USB 4 Sends to DAW can now be set Pre or Post fader
Replacing a standalone cabinet will now retain selected microphone, low-cut and hi-cut filter settings
Added ability to save custom names for Global EQ user presets
Added global option for Default Preset LED color
Added global option for Songs custom label display

Fixes:

FBE-100 improvements to tone stack accuracy
Fixed an issue with switch link not always loading correct button state when using pro control
New Favorite Presets are now added to the bottom of the Favorites list
Fixed issue with several amp models popping on preset recall and when selected in add/replace menus
Fixed issue related to background noises caused by Global EQ
Fixed issue related to Exit Tuner still showing on Tap/Tuner scribble strip after toggling Mixer on/off with Master Volume knob
Fixed issue related to full SD Card indicating backup was successful
Fixed issue related to fader jitter on Global EQ
Fixed default settings for External Cabinet block

Known Issues:

Audio from the lower path in Instrument Split signal path does not mute when Tuner is active and Mute is selected
Adding block to a long signal chain always returns user to beginning of signal path
Scene Edit not working with Tap Div

Firmware Update Procedure
See Firmware Update Instruction Guide for additional information.

Download the latest firmware at the top of this article.
Connect Tone Master Pro to computer via included USB-C cable.
Hold down firmware update button for 10 seconds while powering on.
Tone Master Pro will display “USB Firmware Update Mode” screen.
Drag and drop firmware update file (“.img” file) onto “FENDER_AMP” mounted drive on your computer.
Tone Master Pro will display “Applying Updates” screen. Do not power off until update is complete.
Tone Master Pro will display “Update Complete” screen once the firmware update is complete. Restart Tone Master Pro and enjoy!

----------------------------------------------------------------------------------------------------------

Fender Tone Master Pro Firmware and Pro Control App Updates
Version Information 9/4/2024
Tone Master Pro Firmware – v1.3.89 download link
Pro Control App and Windows ASIO Driver-
Mac – v1.3.2.6604 download link (updated 6-6-2024)
PC – v1.3.2.6643 download link (updated 6-6-2024)
- Fender Universal ASIO Driver download link (Windows) - v5.68.0 (updated 9/4/2024)
- ASIO Driver Knowledge Base Article
Pro Control App system requirements:
- macOS Monterey 12.7 or later
- Windows 10 (x64) 22H2 or later
- Windows 11
- iOS version 13.1 or later
- Android 8 (only arm64-v8a) or later

Release Notes
Tone Master Pro Firmware update
Desktop Pro Control App update
Mobile App update

Fixes:

Fixed volume boost issue with External Cabinet block
Fixed issue with Global EQ causing distortion artifacts underneath main sound for some users

Known Issues:

- Cannot re-download cloud preset after deleting it from My Downloads

Firmware Update Procedure
See Firmware Update Instruction Guide for additional information.

Download the latest firmware at the top of this article.
Connect Tone Master Pro to computer via included USB-C cable.
Hold down firmware update button for 10 seconds while powering on.
Tone Master Pro will display “USB Firmware Update Mode” screen.
Drag and drop firmware update file (“.img” file) onto “FENDER_AMP” mounted drive on your computer.
Tone Master Pro will display “Applying Updates” screen. Do not power off until update is complete.
Tone Master Pro will display “Update Complete” screen once the firmware update is complete. Restart Tone Master Pro and enjoy!

The note below is only for users who have firmware version lower than v1.1.100 on their TMP. If you have v1.1.100 or higher installed, please disregard the following.
NOTE: After you install the firmware update, we strongly recommend you perform a Factory Reset if this is the first time you are updating. The Factory Reset is in the Global Settings (Gear) menu under User Preferences. Please note Factory Reset WILL erase all presets and settings and will load additional Factory Presets into the MY PRESETS folder.

-----------------------------------------------------------------------------------------------------------------

Fender Tone Master Pro Firmware and Pro Control App Updates
Version Information 6/26/2024
Tone Master Pro Firmware – v1.3.78 download link
Pro Control App and Windows ASIO Driver-
Mac – v1.3.2.6604 download link
PC – v1.3.2.6643 download link
Windows ASIO Audio Driver download link - v5.58.0 (updated 10/3/2023)
- ASIO Driver Knowledge Base Article
Pro Control App system requirements:
- macOS Monterey 12.7 or later
- Windows 10 (x64) 22H2 or later
- Windows 11
- iOS version 13.1 or later
- Android 8 (only arm64-v8a) or later

Release Notes
Tone Master Pro Firmware update
Desktop Pro Control App update
Mobile App update

New Features:

- Added new SIC filters:
  - 1x10 ’62 Princeton C10R
  - 1x12 ’62 Princeton CS
  - 1x12 '65 Deluxe C12K
  - 2x12 Vibro-King V30
  - 4x12 Tangerine V30
  - 4x12 Solo G12

Product Enhancements:

- Hyphen character now allowed in backup file names on SD Card and Cloud

Fixes:

- USB levels in mixer reset to 0dB after every reboot (for default reamp levels)
- Tuner now mutes selected channel or channels (Instrument, Mic/Line)
- Custom Wah knobs & text alignment fix
- Closing Pro Control while in Tuner no longer unmutes the tuner unexpectedly
- Scribble strips now update as expected when using Global EQ and Mixer
- Exit Tuner scribble strip no longer persists unexpectedly after toggling mixer

Known Issues:

- Cannot re-download cloud preset after deleting it from My Downloads

Firmware Update Procedure
See Firmware Update Instruction Guide for additional information.

Download the latest firmware at the top of this article.
Connect Tone Master Pro to computer via included USB-C cable.
Hold down firmware update button for 10 seconds while powering on.
Tone Master Pro will display “USB Firmware Update Mode” screen.
Drag and drop firmware update file (“.img” file) onto “FENDER_AMP” mounted drive on your computer.
Tone Master Pro will display “Applying Updates” screen. Do not power off until update is complete.
Tone Master Pro will display “Update Complete” screen once the firmware update is complete. Restart Tone Master Pro and enjoy!

The note below is only for users who have firmware version lower than v1.1.100 on their TMP. If you have v1.1.100 or higher installed, please disregard the following.
NOTE: After you install the firmware update, we strongly recommend you perform a Factory Reset if this is the first time you are updating. The Factory Reset is in the Global Settings (Gear) menu under User Preferences. Please note Factory Reset WILL erase all presets and settings and will load additional Factory Presets into the MY PRESETS folder.

-----------------------------------------------------------------------------------------------------------------

Fender Tone Master Pro Firmware and Pro Control App Updates
Version Information 6/3/2024
Tone Master Pro Firmware – v1.3.74 download link
Pro Control App and Windows ASIO Driver-
Mac – v1.3.1.6535 download link
PC – v1.3.1.6584 download link
Windows ASIO Audio Driver download link - v5.58.0 (updated 10/3/2023)
- ASIO Driver Knowledge Base Article
Pro Control App system requirements:
- macOS Monterey 12.7 or later
- Windows 10 (x64) 22H2 or later
- Windows 11
- iOS version 13.1 or later
- Android 8 (only arm64-v8a) or later

Release Notes
Tone Master Pro Firmware Update
Desktop Pro Control App update
Mobile Apps (NEW)!!

New Features:

- Fender Pro Control App
  - Create, edit and share presets wirelessly with iOS or Android phones and tablets
  - Share to or download presets from the community of users and artists
  - Supports iOS 13.1 or later
  - Supports Android 8 (only arm64-v8a) or later
- SD Card Backup & Restore
  - Store up to 25 backups locally on Micro SD card
  - Options for Backup/Restore located in Settings->User Preferences
  - Supports all micro-SD cards
- Block Settings
  - New Block Settings menu in block edit screens. Block Settings allow you to save personalized settings for amp/cab/effect blocks and recall them from Add/Replace menus. Save up to 5 user block settings per model.
- EXP Live Mode
  - When enabled, the preset reads the current position of the Expression pedal on preset change. This is useful for global volume by adding a Volume Pedal block to each preset.
- 3^rd-Party IR Speaker Impedance Curves
  - This allows you to select an appropriate speaker impedance curve that most closely matches your 3rd party IR.
- Global EQ and mixer footswitch control now implemented
  - Parameter levels displayed on scribble strips and faders can be controlled from footswitch encoders
- External Cab option added to standalone cabinet list
  - Allows use of Tone Master Pro amp models sent to an external cabinet or IR in the DAW.

New Models:

- Amp Models
  - ‘62 Princeton
  - ‘65 Deluxe Reverb Blonde NBC (No Bright Cap)
  - Solo 100 Overdrive
  - Tangerine RV53
- Cab Models
  - 1x10 ’62 Princeton C10R
  - 1x12 ‘62 Princeton CS
  - 4x12 Solo G12
  - 4x12 Freeman Greenback
  - 4x12 Bassbreaker V30
  - 4x12 Tangerine V30
  - 4x12 British V30
  - 4x12 British G65
- Effect Models
  - Super Drive
  - Rocket Man
  - Big Apple Fuzz
  - Little Rock Phaser
  - Analog Delay
  - EchoTank
  - Reverse Nebula Reverb
  - Filtron
  - Enigma Filter

Product Enhancements:

- Songs now allow custom labels for each footswitch
- Song Labels now use large font on scribble strips
- User IR level is now displayed in dB instead of %
- Volume pedal effect now supports both mono and stereo signals
- Tuner now mutes only the channels that are being tuned.

Fixes:

- Resolved issue with FX Loops 3&4 levels
- Scrolling improvements for presets with more models than fit on the screen
- Fixed an issue in which moving a block to other the channel within a signal path type can reset block parameters to default
- Fixed a UI display issue in the Mixer when adjusting a fader with the gradient view
- Fixed issue related to some effects having a volume drop when placed post-amp model
- Volume pedal fully mutes signal when set to 0%
- Flanger rate knob taper modified to be closer to reference pedal
- Fixed click on tape echo models
- All amps, cabs & effects are phase coherent from input to output
- Cancel button no longer persists after exiting Add Block from Signal Path
- Celestial Reverb will no longer self-oscillate if Pitch 1 or Pitch 2 set to 0.00
- Footswitches no longer show My Presets bank instead of Favorites bank after overwriting a Favorites preset
- Corrected tonal difference between Space Delay Mono and Stereo

Known Issues:

- Cannot re-download cloud preset after deleting it from My Downloads
- Closing Desktop App while Tuner is active on hardware unmutes Tuner
- Wrong Cab edit name displayed if User IR is replaced with factory cab in a preset

Firmware Update Procedure
See Firmware Update Instruction Guide for additional information.

Download the latest firmware at the top of this article.
Connect Tone Master Pro to computer via included USB-C cable.
Hold down firmware update button for 10 seconds while powering on.
Tone Master Pro will display “USB Firmware Update Mode” screen.
Drag and drop firmware update file (“.img” file) onto “FENDER_AMP” mounted drive on your computer.
Tone Master Pro will display “Applying Updates” screen. Do not power off until update is complete.
Tone Master Pro will display “Update Complete” screen once the firmware update is complete. Restart Tone Master Pro and enjoy!

The note below is only for users who have firmware version lower than v1.1.100 on their TMP. If you have v1.1.100 or higher installed, please disregard the following.
NOTE: After you install the firmware update, we strongly recommend you perform a Factory Reset if this is the first time you are updating. The Factory Reset is in the Global Settings (Gear) menu under User Preferences. Please note Factory Reset WILL erase all presets and settings and will load additional Factory Presets into the MY PRESETS folder.

-----------------------------------------------------------------------------------------------------------------

Fender Tone Master Pro Firmware and Pro Control App Updates
Version Information 2/15/2024
Tone Master Pro Firmware – v1.2.56 download link
Pro Control App and Windows ASIO Driver-
Mac – v1.2.4.5828 download link
PC – v1.2.4.5866 download link
Windows ASIO Audio Driver download link - v5.58.0 (updated 10/3/2023)
- ASIO Driver Knowledge Base Article
Pro Control App system requirements:
- macOS Monterey 12.7 or later
- Windows 10 (x64) 22H2 or later
- Windows 11

Release Notes
Tone Master Pro Firmware Update
Desktop Pro Control App update

New Features:

- Added “Switch Link” function to footswitch assignments. Assign up to eight footswitches to a switch link group (A, B, C or D). When footswitches are grouped together in a switch link, only one can be active at a time. Select any linked footswitch to turn its parameters ON and subsequently turn OFF any active switches in the group.
- Added “Switchless Bypass” function to EXP assignments. Now able to turn on block(s) without Toe Switch by moving the expression pedal.
- Added Preset MIDI to Preset Settings menu. Allows ability to send up to 5 custom MIDI Program Change (PC) and Continuous Controller (CC) messages when selecting any TM Pro preset
- New Cab Model - 4x12 British Blackback (based on a vintage Marshall 1960A cab with Celestion-Rola G12H-30 “Blackback” speakers)

Product Enhancements:

- Amp model update – EVH 5150 IIIS 6L6 Red
- Amp model update – EVH 5150 IIIS 6L6 Blue
- Amp model update – EVH 5150 IIIS 6L6 Green
- Amp model update – British 800
- British 800 half-stack now uses 4x12 British Blackback as default cab
- Added User IR Level control to IR edit screen
- Added DIM LED option for all footswitch assignments
- Added current value display to Parameter Change footswitch assignment screens for active/inactive value selection
- Parameter Change footswitch assignments active/inactive values now default to current value instead of min/max
- Added support for default footswitch LED active/inactive color options in Global Settings>Footswitch
- Looper position can now be toggled between Pre / Post in Instrument signal path using the top right footswitch labeled “HOLD: POSITION” when in Looper Mode
- After assigning a preset to a footswitch in a song, the preset will load and its corresponding footswitch LED will light up
- Added +/– buttons for fine adjustments on gradient sliders in Pro Control App
- Added MIDI Thru and Merge options in I/O Settings>MIDI
- Added MIDI CC support for Amp Control jacks, Master Volume and Looper commands

Fixes:

- Fixed phase alignment of some internal Cab IRs
- Fixed footswitch LED out of sync with single effect issue
- Fixed “popping” issue when selecting preset with Maximus Drive with boost enabled
- Fixed bug in EVH 5150 IIIS Red amp model where some unnecessarily modeled effects loop circuitry was affecting the tone
- Fixed bug in British 800 model where Master Volume would cause “rubber-banding” at higher settings
- Improved experience when reordering presets via long drag & drop on TMP and in Pro Control
- Changed Cloud Reverb High Damp parameter to 100Hz increments instead of 1Hz
- Fixed an issue where older community accounts were unable to backup/restore to Cloud
- Footswitch LED now continues to illuminate after saving a preset in Songs Mode
- Mythic Drive font now matches between hardware and Pro Control
- 4x12 Mega V30 Cab model now uses same % of DSP resources as other cab models
- Signal path selection is now highlighted in the list menu after selecting a new signal path type
- Chromatic Pitch Shifter “Pitch” parameter is now adjusted in steps of 1 cent within the gradient adjustment control when using the +/– buttons
- Assigning an FX Loop to a Toe Switch and then deleting the FX Loop from the signal path no longer leaves behind a blank, un-editable Toe Switch assignment
- Fixed issue when navigation through the list is interrupted due to continuous dragging process
- Fixed issue where double tap selection in "add preset to song" popup switches the mode
- Fixed issue where selecting mic for cab returns screen to cab selection window instead of cab edit drawer
- Fixed "Undefined" preset name in Song Footswitch Assignment
- Outgoing USB signals now appear as USB 1-4 instead of Analogue 1-4 in DAW settings
- Ribbon mic placement corrected in speaker cabinet microphone selection list
- Improved preset list scrolling performance on TM Pro
- 4x12 British Jubilee cab renamed 4x12 British Jubilee V30

Known Issues:

- Cannot re-download cloud preset after deleting it from My Downloads
- Closing Desktop App while Tuner is active on hardware unmutes Tuner
- Wrong Cab edit name displayed if User IR is replaced with factory cab in a preset

Firmware Update Procedure:
See Firmware Update Instruction Guide for additional information.

Download the latest firmware at the top of this article.
Connect Tone Master Pro to computer via included USB-C cable.
Hold down firmware update button for 10 seconds while powering on.
Tone Master Pro will display “USB Firmware Update Mode” screen.
Drag and drop firmware update file (“.img” file) onto “FENDER_AMP” mounted drive on your computer.
Tone Master Pro will display “Applying Updates” screen. Do not power off until update is complete.
Tone Master Pro will display “Update Complete” screen once the firmware update is complete. Restart Tone Master Pro and enjoy!

The note below is only for users who have firmware version lower than v1.1.100 on their TMP. If you have v1.1.100 or higher installed, please disregard the following.
NOTE: After you install the firmware update, we strongly recommend you perform a Factory Reset if this is the first time you are updating. The Factory Reset is in the Global Settings (Gear) menu under User Preferences. Please note Factory Reset WILL erase all presets and settings and will load additional Factory Presets into the MY PRESETS folder.

-----------------------------------------------------------------------------------------------------------------
Fender Tone Master Pro Firmware and Pro Control App Updates
Version Information 11/20/2023
Tone Master Pro Firmware – v1.1.111 download link
Pro Control App and Windows ASIO Driver-
Mac – v1.1.8.5406 download link
PC – v1.1.8.5433 download link
Windows ASIO Audio Driver download link - v5.58.0 (updated 10/3/2023)
- ASIO Driver Knowledge Base Article
Pro Control App system requirements:
- macOS Monterey 12.7 or later
- Windows 10 (x64) 22H2 or later
- Windows 11
Release Notes

Tone Master Pro Firmware Update
Desktop Pro Control App update
Product Enhancements
- Significant improvement of touch screen response – larger touch zones
- Setlist View interface and performance improvements
Bugs Fixed
- Flanger Mod Rate now responds to TAP Tempo
- Reverse delay volume drop
- FX Loop 2 now loads in enabled state
- Latency improvements for parallel signal path types
- Reduced Round Fuzz Germanium gain
- Spillover now on for all reverb effects by default
- FX Loop 3 and 4 audition audio loads correctly
- Aux In now muted when disconnected to alleviate potential noise
- Loading a preset with the Jubilee amp no longer causes audio to ramp up
- Last used preset now loads when powering unit up
Known Issues
- Changing mic on standalone cab returns to cab selection screen instead of cab edit screen

Firmware Update Procedure
See Firmware Update Instruction Guide for additional information.

Download the latest firmware at the top of this article.
Connect Tone Master Pro to computer via included USB-C cable.
Hold down firmware update button for 10 seconds while powering on.
Tone Master Pro will display “USB Firmware Update Mode” screen.
Drag and drop firmware update file (“.img” file) onto “FENDER_AMP” mounted drive on your computer.
Tone Master Pro will display “Applying Updates” screen. Do not power off until update is complete.
Tone Master Pro will display “Update Complete” screen once the firmware update is complete. Restart Tone Master Pro and enjoy!

The note below is only for users who have firmware version lower than v1.1.100 on their TMP. If you have v1.1.100 or higher installed, please disregard the following.
NOTE: After you install the firmware update, we strongly recommend you perform a Factory Reset if this is the first time you are updating. The Factory Reset is in the Global Settings (Gear) menu under User Preferences. Please note Factory Reset WILL erase all presets and settings and will load additional Factory Presets into the MY PRESETS folder.

-----------------------------------------------------------------------------------------------------------------

Fender Tone Master Pro Firmware and Pro Control App Updates
Version Information 10/3/2023
Tone Master Pro Firmware – v1.1.100 download link
Pro Control App and Windows ASIO Driver-
Mac – v1.1.6.5171 download link
PC – v1.1.6.5202 download link
Windows ASIO Audio Driver download link - v5.58.0 (updated 10/3/2023)
- ASIO Driver Knowledge Base Article
Pro Control App system requirements:
- macOS Monterey 12.7 or later
- Windows 10 (x64) 22H2 or later
- Windows 11
Release Notes

Desktop Pro Control App with Mac and PC support
Added New Features
- New Factory Presets
- Added Song and Setlist modes
- Added Looper
- Additional MIDI support
- Additional template routings
- Additional footswitch layouts
- Auto brightness for screen and scribble strips
- Speed improvements for UI
- Bluetooth now supports pin pairing
- User global EQ’s
Added New Effects
- Nashville Overdrive
- Round Fuzz – Germanium
- 3D Chorus
- Triple-Double Chorus
- Electric Flanger
- Orbit Stereo Panner
- Rotary Speaker 122
- Rotary Speaker 147
- Auto-Swell Delay
- Dynamic Delay
- ‘63 Spring Reverb Convolution
- ‘65 Spring Reverb Convolution
- Cloud Reverb
- Nebula Reverb
- Shimmer Reverb
- Auto-Swell Volume
- Chromatic Pitch Shifter
- Diatonic Harmonizer
- Feedback Generator
- Pedal Detune
Added New Amps
- ‘59 Bassman
- British Jubilee Clean
- British Jubilee Rhythm
- British Jubilee Lead
- Marksman Ch1
- Marksman Ch2
Added New Speaker Cabinets
- 1x12 Mega EV
- 4x10 ‘59 Bassman
- 4x12 British GB
- 4x12 British Jubilee V30
- 4x12 Mega Shadow

Firmware Update Procedure
See Firmware Update Instruction Guide for additional information.

Download the latest firmware at the top of this article.
Connect Tone Master Pro to computer vis included USB-C cable.
Hold down firmware update button for 10 seconds while powering on.
Tone Master Pro will display “USB Firmware Update Mode” screen.
Drag and drop firmware update file (“.img” file) onto “FENDER_AMP” mounted drive on your computer.
Tone Master Pro will display “Applying Updates” screen. Do not power off until update is complete.
Tone Master Pro will display “Update Complete” screen once the firmware update is complete. Restart Tone Master Pro and enjoy!

NOTE: After you install the v1.1.100 firmware, we strongly recommend you perform a Factory Reset for this initial update. The Factory Reset is in the Global Settings (Gear) menu under User Preferences. Please note Factory Reset WILL erase all presets and settings and will load additional Factory Presets into the MY PRESETS folder.

Version Information 6/4/2025

Version Information 3/26/2025 Tone Master Pro Firmware – v1.5.21 download linkPro Control App and Windows ASIO Driver- Mac – v1.5.3.7680 download link PC – v1.5.3.7658 download link

Version Information 3/26/2025
Tone Master Pro Firmware – v1.5.21 download link
Pro Control App and Windows ASIO Driver-
Mac – v1.5.3.7680 download link
PC – v1.5.3.7658 download link